CleanBench Accessories and Options

Front Support Bar mounts on the table’s front legs. It has a slot in which the shelves mount and is normally ordered with the armrest pads. The bar may be centered along the length of the table or cantilevered to either side, allowing for a wider sliding shelf to suit your application.

Rear Support Bar mounts on the rear table legs and supports the rear end of the sliding shelves. It may also be cantilevered to either side, allowing for a wider sliding shelf.

Both front and rear support bars can be retrofitted but cannot be used with the Full Perimeter Enclosure or Faraday Cage.

Have a total weight capacity of 1,000 lb (450 kg) and can be mounted to the base of the table legs. Casters are required when using the OnTrak™ feature.

An easy to use roll-off option for CleanBench tables that dramatically simplifies table rigging and installation. Requires a table with casters.

• Reduces setup time
• No heavy lifting required
• Table ships pre-installed on isolator frame

Fasten to the front support bar. TMC also offers an armrest pad that attaches to the Full Perimeter Enclosure.

Shelves slide freely from side to side and are easily lifted off the support bars. Built-in stops prevent shelves from sliding out of slots. Sliding shelves require front and rear support bars. The subshelf offers additional storage space. It can be mounted beneath the isolated table top and may be retrofitted.

A welded-steel structure that completely surrounds the table top to provide non-isolated support for Faraday cages or other special fixtures. It cannot be used with sliding shelves or support bars. There is an 8 in. wide sliding shelf specifically for the Full Perimeter Enclosure and it is required for use with a Faraday Cage.

Minimize bottled air supply usage, standard TMC height control valves have a small “dead band,” resulting in a height return accuracy of +/- 0.05 in. (+/- 1.3 mm). Precision valves control height to within +/- 0.005 in. but exhaust continuously. Precision valves may be retrofitted to installed tables.

Offers improved access and simplified assembly. It’s designed for shielding in electro-physiology type applications (60 Hz and harmonics). The “window-shade” retracting front panel is easy to operate and causes less disturbance when adjusted. The front panel may be positioned anywhere between fully opened and closed and stays in position without a fastener. This cage incorporates a steel frame and bronze-mesh material and mounts to a required full-perimeter enclosure. Our 40 in.(1 m) tall Faraday Cage includes a 2 in.(50 mm) diameter hole in the base of the side and rear panels. This feature eases cable interface to the interior of the cage.

TMC's earthquake restraint bracket system provides increased safety and stability for optical tables in high-risk earthquake areas without affecting table performance. The TMC earthquake restraint system relies on top brackets and upper tiebars to control motion of the table top and, where severe occurrences are anticipated, floor brackets with lower tiebars to secure the support structure to the floor.