Micro-g

System1 4-post vibration isolation support systems for optical tables
  • Overview +


    Micro-g optical table support systems are an ideal match for our CleanTop optical tables and breadboards. A wide range of configuration options, including height, weight capacity, and vibration isolation performance, are available.

    Most tops are best supported by a 4-post system with tie-bars, however for those longer than 10 ft (3 m) we recommend a 6-post system. In addition to the higher weight capacity, the structural characteristics of the top are enhanced by the additional support points.

    System1 optical table pneumatic vibration isolation support system

    When open access between the posts is necessary Micro-g Free-Standing Posts are a convenient alternative to posts with tiebars . Though generally configured in sets of 4 and 6 legs, other configurations include 3 and 5 legs. The independent posts offer the maximum flexibility in post positioning with respect to the optical top.

    System 1 individual pneumatic vibration isolation posts for optical tables Available configurations for free standing vibration isolation posts
  • Vibration Isolation Performance +


    Three damping/isolation levels are available. Choose maximum vibration attenuation or aggressive damping for applications with moving stages or robotic motion.

    Gimbal Piston vs MaxDamp vibration isolation performance transfer function

    * Rigid non-isolating supports do not provide additional vibration isolation and are excluded from these graphs.

  • How to Select +


    Choose Support Type
    Micro-g gives you superior convenience and economy in acquiring precisely the equipment you need for supporting optical tables or other large work surfaces. The unique Micro-g design lets you customize basic features and still have off-the-shelf prices and speedy delivery. There are six categories of options, and the convenient selection charts help you construct a part number for ordering. Systems can also be easily upgraded – whether to convert from a leveling stand to an isolator or add casters – whenever required.

    Micro-g interchangeable vibration isolator options
    Select 

    Isolators/Leveling Posts – If you need vibration isolation now, our isolators are unsurpassed in the industry for passive vertical and horizontal vibration attenuation – especially as demonstrated at realistic, low levels of input.

    If a rigid non-isolating stand will suffice, TMC offers an economical leveling mount option with rugged, adjustable jack screws that provide +2 1/2 and - 0 in. (+62 and - 0 mm) of travel. Later, you can upgrade the system to full vibration isolation performance, with a total cost only slightly more than if you had opted for this feature originally.

    Load Capacities – Depending on the weight of your table and onboard equipment, you can select support systems with capacities of 1,400, 4,000, 6,000, 10,000, or 15,000 lb (600, 2,000, 3,000, 4,500, or 7,000 kg, respectively). Customized systems can be configured from standard components to support virtually any structure.

    Height – Seven post heights are available as standard: 12, 16, 18, 22, 24, 28, and 32 in. (300, 400, 450, 550, 600, 700, and 800 mm, respectively) – though not all sizes are available in all capacities. Taking into account the table thickness and height of equipment components, select the post size that provides the working height you need. Ergonomic convention would dictate 36 in. (900 mm) from floor to table top surface.

    Tiebars – For safety reasons, tiebars are recommended. They are mandatory when you choose casters or anticipate upgrading to them. If you require constant access to the area under the table, free-standing support bases will provide more than adequate stability.

    Casters – TMC's optional casters are of a rugged, heavy-duty design making an installed table easily movable when they are engaged. Once the table is positioned, the casters retract to establish solid floor contact during equipment operation. Like other Micro-g features, they can be integrated at the outset or purchased later if you choose to upgrade. Casters retract externally on the smallest capacity posts, internally on the intermediate, and are not available for the highest capacity. They are not available on posts less than 18 in. tall.

    Configurations – A simple four-post frame configuration is the most common; however, depending on the size and shape of the supported structure and on the weight and position of onboard equipment, another multiple support system may be preferred. For unusual size tops or if you have any doubt as to your approach, please call us.



    Order
    1. Determine whether vibration isolation is required or whether rigid, non-resonant support is adequate.

    2. Determine if Casters are going to be used, tie bars are required.  Casters cannot be used with free standing posts, nor 2,500 lb capacity posts.

    3. Find the size of the optical top to be supported in the left column of the ordering chart, pick the leg system number from the appropriate column.

    4. Ensure that the support has adequate capacity by comparing the capacity to the optical top weight plus equipment load.
      • Top weight is equal to the Top Area times the Weight Factor from the bottom of the size chart for Optical tops
      • The total payload should fall between 25% and 75% of the isolator capacity.
      • Generally, 8 in. (200mm) and 12 in. (300mm) tops require 13 or 14 series legs, 4 post systems.

    5. Assign the height code (H) to the catalog number based on the desired height of the table surface and thickness of the optical top, generally 36” high is for standing at the work surface.

    6. Leveling baseplates, with wear plates, are an option for 13,14, and 16 series.  These can be helpful if your floor is not perfectly level. 
      1. To specify Leveling Baseplates the fourth digit of the catalog number should be ‘4’.  If plain baseplates are desired, then the fourth digit should be ‘3’
      2. Example, 16-143-00 becomes 16-133-00

    7. Standard Height Control valves are included when ordering Isolators in sets of 4 and 6, example 14-426-35, includes four isolators, casters, tie bars and control valves.

    8. Height control valves must be specified when ordering individual posts.  Choose valve kit from the Height Control Valve Kit ordering Chart.
      1. Note, if more than 4 posts are being combined, a suffix must be added, e.g for 8 of 14-134-00, the correct valve kit is SV14-8).

    9. Contact TMC when in doubt and for unusual configurations.
  • Ordering Charts for 4-Post Systems +




    Model Number Structure

    Example model: 14-425-35

    Code 14 425 35
     
     Code description
    Prefix  Casters and height Suffix
    Support type, cross-section size and weight capacity Length and width
    Example model description Gimbal Piston
    6 in. cross section
    4000 lb weight capacity
    22 in. height
    with casters
    50 x 30 in.
    Prefix and Suffix Chart

    Below we provide our recommended system size and load capacity based on the size of the top

    Table Top Dimentions WxL
     Recommended Support System WxL Weight Capacity
    lbs. (kg)
    Prefix Code Suffix Code
    in. (mm) in. (mm) Rigid Supports Gimbal Piston
    30 x 36
    (750 x 900)
    20 x 26
    (500 x 650)
    1400
    (600)
    11 12 28
    30 x 48
    (750 x 1200)
    20 x 35
    (500 x 875)
    1400
    (600)
    11 12 29
    30 x 60
    (750 x 1500)
    20 x 40
    (500 x 1000)
    1400
    (600)
    11 12 24
    30 x 72
    (750 x 1800)
    15 x 40
    (375 x 1000)
    4000
    (1800)
    13 14 14
    30 x 96
    (750 x 2400)
    15 x 50
    (375 x 1250)
    4000
    (1800)
    13 14 15
    30 x 120
    (750 x 3000)
    15 x 60
    (375 x 1500)
    4000
    (1800)
    13 14 16
    36 x 48
    (900 x 1200)
    26 x 35
    (650 x 875)
    1400
    (600)
    11 12 89
    36 x 60
    (900 x 1500)
    26 x 40
    (650 x 1000)
    1400
    (600)
    11 12 84
    36 x 72
    (900 x 1800)
    20 x 40
    (500 x 1000)
    4000
    (1800)
    13 14 24
    36 x 96
    (900 x 2400)
    20 x 50
    (500 x 1250)
    4000
    (1800)
    13 14 25
    36 x 120
    (900 x 3000)
    20 x 60
    (500 x 1500)
    4000
    (1800)
    13 14 26
     40 x 60
    (1000 x 1500)
    26 x 35
    (650 x 875)
    4000
    (1800)
    13 14 89
    40 x 80
    (1000 x 2000)
    26 x 40
    (650 x 1000)
    4000
    (1800)
    13 14 84
    40 x 120
    (1000 x 3000)
    26 x 60
    (650 x 1500)
    4000
    (1800)
    13 14 86
    48 x 60
    (1200 x 1500)
    30 x 35
    (750 x 875)
    4000
    (1800)
    13 14 39
    48 x 72
    (1200 x 1800)
    30 x 40
    (750 x 1000)
    4000
    (1800)
    13 14 34
    48 x 96
    (1200 x 2400)
    30 x 50
    (750 x 1250)
    4000
    (1800)
    13 14 35
    48 x 120
    (1200 x 3000)
    30 x 60
    (750 x 1500)
    4000
    (1800)
    13 14 36
    48 x 144
    (1200 x 3600)
    30 x 70
    (750 x 1750)
    4000
    (1800)
    13 14 37
     59 x 60
    (1500 x 1500)
    40 x 35
    (1000 x 875)
    4000
    (1800)
    13 14 49
    59 x 72
    (1500 x 1800)
    40 x 40
    (1000 x 1000)
    4000
    (1800)
    13 14 44
    59 x 80
    (1500 x 2000)
    40 x 40
    (1000 x 1000)
    4000
    (1800)
    13 14 44
    59 x 96
    (1500 x 2400)
    40 x 50
    (1000 x 1250)
    4000
    (1800)
    13 14 45
    59 x 120
    (1500 x 3000)
    40 x 60
    (1000 x 1500)
    4000
    (1800)
    13 14 46
    59 x 144
    (1500 x 3600)
    40 x 70
    (1000 x 1750)
    4000
    (1800)
    13 14 47

    *4000 lb weight capacity requires 6-inch cross section posts. 1400 lb weight capacity systems have 4-inch cross section posts.

    Caster and Height Code Chart
    Height*
    Casters
    Yes No
    12 in. / 305 mm - 412
    16 in. / 406 mm - 413
    18 in. / 457 mm 424 414
    22 in. / 559 mm 425 415
    24 in. / 610 mm 426 416
    28 in. / 711 mm 427 417
    32 in. / 813 mm 428 418

    *4-inch cross section posts can only be 28 in. (711 mm) and taller.

  • Ordering Charts for 6-Post Systems +





    Model Number Structure

    Example model: 14-625-35

    Code 14 625 35
     
     Code description
    Prefix  Casters and height Suffix
    Support type Length and width
    Example model description Gimbal Piston
    22 in. height
    with casters
    50 x 30 in.
    Prefix and Suffix Chart

    Below we provide our recommended system size and load capacity based on the size of the top. Note the L dimension is ~half the total length of the frame.

    Table Top Dimentions WxL
     Recommended Support System WxL Weight Capacity
    lbs. (kg)
    Prefix Code Suffix Code
    in. (mm) in. (mm) Rigid Supports Gimbal Piston
    48 x 120
    (1200 x 3000)
    30 x 30
    (750 x 750)
    6000
    (3000)
    13 14 33
    48 x 144
    (1200 x 3600)
    30 x 40
    (750 x 1000)
    34
    48 x 168
    (1200 x 4200)
    30 x 50
    (750 x 1500)
    35
    48 x 192
    (1200 x 4800)
    30 x 60
    (750 x 1000)
    36
    59 x 120
    (1500 x 3000)
    40 x 30
    (1000 x 750)
    43
    59 x 144
    (1500 x 3600)
    40 x 40
    (1000 x 1000)
    44
    59 x 168
    (1500 x 4200)
    40 x 50
    (1000 x 1250)
    45
    59 x 192
    (1500 x 4800)
    40 x 60
    (1000 x 1500)
    46
    Caster and Height Code Chart
    Height*
    Casters
    Yes No
    12 in. / 305 mm 622
    612
    16 in. / 406 mm 623 613
    18 in. / 457 mm 624 614
    22 in. / 559 mm 625 615
    24 in. / 610 mm 626 616
    28 in. / 711 mm 627 617
    32 in. / 813 mm 628 618
  • Ordering Charts for Free-Standing Posts +


    free standing vibration isolation post general schematic
    Single Post System Ordering Chart
    Catalog Number H A C Weight capacity
    per post
    Gimbal Piston
    Isolator
    Rigid Post in. mm in. mm in. mm lb kg
    14-142-00 13-142-00 12 305 6 152 0.5 13 1000 500
    14-143-00 13-143-00 16 406
    14-144-00 13-144-00 18 457
    14-145-00 13-145-00 22 559
    14-146-00 13-146-00 24 610
    14-147-00 13-147-00 28 711
    14-148-00 13-148-00 32 813
    16-143-00 Non-standard
    solution
    available
    16 406 8 203 - - 2500 1000
    16-145-00 22 559
    16-147-00 28 711

    NOTE: Free-standing individual posts are incompatible with retractable casters. 12-inch posts do not incorporate baseplates.


    Height Control Valve Kit Ordering Chart

    The kit includes 3 valves and enough tubing to cover the indicated number of posts.

    Catalog Number Valve Kit
    SV14 Standard 14-series kit for four 14-series posts
    SV14-X Kit for over four 14-series posts. X is the number of posts
    SV16 Standard 16-series kit for 4 16-series posts
    SV16-X Kit for over four16-series posts. X is the number of posts
  • Setup Guide (pdf) +

  • Setup Guides (Video) +