Floor Plactform supported by Gimbal Piston™ Isolators

See a larger image or the 65 SERIES Floor Platform with Gimbal Piston™ Isolators

TMC’s low-profile 65 Series Floor Platform Isolation Systems are designed for larger, floor-mounted instruments. These platforms effectively isolate instruments weighing a few hundred to tens of thousands of pounds and do so without the compromises in stability normally encountered when isolating instruments with a high center-of-mass.

Historically, we approached the problem of a tall, top-heavy payload by combining our Gimbal Piston™ Air Isolators with “ lifthoods” and a massive floor platform. This lowered the effective system center-of-mass and achieved the required stability.

Increasingly, our floor platforms are configured with our STACIS ® Active Piezoelectric Isolators, but the Gimbal Piston™ Air Isolators Floor Platform is still recommended in many applications. We will help you determine whether a STACIS® or Gimbal Piston™ Floor Platform is best for you.

TMC works closely with instrument manufacturers to ensure that our platform design meets the instrument’s footprint, structural, and utility requirements. We have successfully isolated hundreds of different instruments and are often already familiar with the tool requirements. In most instances, you need only provide the tool manufacturer and model for us to recommend a solution.

How to Order

1. IIdentify the equipment or instrument model and configuration.
2. Confirm the type of floor you have - conventional tiled lab floor, wooden beam and planks, etc.
3. Tell us if the instrument manufacturer has made  a pre-installation site survey of the vibration level. In most cases a standard floor platform will be recommended. We may recommend taking our own site vibration measurements and look at the special conditions involved.

Contact TMC for more information.