<<< BACK
Everstill™ K-400
Active Vibration Cancellation Benchtop Platform

Introducing Everstill™, TMC's latest breakthrough in advanced floor vibration control. The patented Everstill K-400 is a benchtop active vibration cancellation platform which incorporates a "serial type" active architecture. This combined with velocity sensors for enhanced low frequency sensitivity attains a dramatic level of low frequency vibration attenuation.

Designed to isolate ultra-precision instruments from building floor vibration down to below 1 Hz, the Everstill K-400 is ideal for optical microscopes, SPMs, and metrology instruments. With Gainmatch™ (patent pending), easily choose one of three gain settings to achieve optimal performance in your environment.

With technology evolving from TMC's STACIS® piezoelectric vibration cancellation, Everstill is an active hard-mount that cancels vibration starting at 0.7 Hz. Specifically designed for maximum low frequency performance, Everstill excels in the critical 1-10 Hz range where precision instruments tend to be the most sensitive.

The portable, compact design is ideally suited for easy installation on work benches and tables. The only input requirement is power from a standard AC outlet.

U.S. Patent No. 8,899,393
Everstill™ K-400 Active Vibration Cancellation BenchTop Platform
Microscopy Today Logo
Everstill™ K-400
Active Vibration Cancellation Benchtop Platform
Everstill™ K-400
Active Vibration Cancellation Benchtop Platform - detail
Everstill K-400 Setup Video

The Everstill™ Advantage

Superior low frequency performance. Starts to isolate at 0.7 Hz. Dramatic vibration cancellation, especially in the critical 1-10 Hz range

Patented active vibration cancellation technology. Ideal for small, lightweight, ultra-precision instruments

Active hard-mount.
No air. Robust plug and play design

Advanced Vibration sensor technology. Incorporates geophone type velocity sensors for sub-Hz performance. Better low frequency sensitivity than accelerometers.

Gainmatch™ (patent pending) to optimize performance. A switch allows users to easily choose between 3 gain settings. This ensures maximum vibration cancellation with assurance of stability for different user environments.

Schematic architecture: Serial type active (actuator in series with isolator spring)

Vibration sensors: Geophone type velocity sensor (voltage proportional to velocity)

Leveling: Automatic. Repeatability: +/- 0.02 in (+/- 0.5mm)

Dimensions: (W x L x H) 16 x 20 x 4 in., 400 x 500 x 100 mm

Weight: 55 lbs. (25 kg)

Payload capacity: 50 – 330 lbs. (23 – 150 kg)

Isolation performance: 4 – 7 dB @ 1.0 Hz > 20 dB above 2.5 Hz

Resonant frequency: 0.6 Hz

Active vibration cancellation bandwidth: 0.7 – 100 Hz

Passive vibration cancellation bandwidth: up to 1000 Hz

Facility requirement: 90-220V, 50/60Hz

Transportation: Internal lock-out restraint

Top Plate: Available with no holes, 1/4-20 or MG tapped holes

Everstill K-400 Transmissibility Chart

Ordering Chart
Everstill™ Active Vibration Cancellation Benchtop Platform